|
For More Info Call:
800-882-5543
John Tracy x. 3806 |
|
|
The die-cut process lends itself
to a clean, burr-free end condition. If a two blade cutoff is
used (one blade scarfs the top of the tube and the second
vertical blade comes down and cuts the tube) a burr-free,
dimple-free end cut will result. |
The Haven Tube Cutter is a
high-speed cutoff that uses a double cut process to re-cut
tubing from mill lengths to customer-specified shorter
lengths. With the Haven, there are no metal shavings to be
removed after cutting. The end condition of the tubing after
cutting is dimple-free with minimal burr. We currently have
five Haven machines in operation.
|
Specifications |
| Round
O.D. Range |
0.500" - 5.000" |
|
Square/Rectangle O.D.
Range |
0.625"
- 3.000" |
| Gauge
Range |
22 - 8 |
| Finished
Length Range* |
1" -
158" |
| WIP
Material Length |
120" -
300" |
| Std.
Length Tolerance |
± 1/16" |
| Steel
Types |
1008 -
1022 |
|
* Tube
lengths up to 120" (14 gauge and lighter) can be brush
de-burrred in-line. |
|
 |
|
